I have a Display that is supplied with 2A through the USB Port of the StromPi3. That works well with a 12V/5A power source. However, the display’s backlight stays on after the raspberry pi was shutdown.
Is there a way to cut off the power to the USB connector after shutdown?
Good Morning Matthias,
Yes, this is possible. Just choose a Powerpath Mode which includes the battery, choose shutdown mode „Disabled“ and set a Batterylevel for the battery shutdown mode. With these settings the StromPi switches to battery in case of primary powerfail. In case the battery level hits the selected battery level, the StromPi shuts the system down.
Mit freundlichen Grüßen