Helpdesk

Hello,
can i buy the StromPi 2 and use it on a RPI3B+?
Does the RPI3B plus power up after current failure with the T-PIN on?
Do i need the alu case https://www.reichelt.nl/index.html?ACTION=7&LA=3&OPEN=0&INDEX=0&FILENAME=C700%2FDATENBLATTRB-STROMPI2-CASE.pdf ?
Or can i use my old case if i don't use the Voltage input or Current-Output from the StromPi?
What does the High-Power USB Output do when i don't use the Voltage input or Current-Output from the StromPi? I just wanna use the UPS function.


Regards,
Wouter

Wouter

17.09.19 19:01

Hi Wouter,
sorry for the delayed answer. StromPi 2 with RPI3B+ is difficult due to the low profile design of the StromPi 2 and the POE Pins of the Raspberry Pi 3b+. You would need an GPIO extension or use the StromPi 2 not stacked on the Raspberry Pi and connected with wires.


Best regards
Nils (Joy-IT)

Nils

20.09.19 18:08